Garage Door Safety Inspection is one of the most common calls we get. A technician will explain what is wrong and what it will cost before starting, and test the door before leaving. A full safety check of springs, cables, sensors and auto-reverse.
Signs you need garage door safety inspection
- The door doesn't reverse when it touches an object
- Missing or misaligned photo eyes
- An older opener without photo-eye sensors
- Frayed cables or damaged springs
Why this happens
- Sensors knocked out of alignment
- Force settings turned up too high
- Openers installed before photo eyes were required (pre-1993)
Before the technician arrives
- Place a roll of paper towels where the door closes. The door must reverse on contact.
- Wave something through the photo-eye beam while the door is closing. It should reverse.
Still stuck? Our free symptom checker and troubleshooting wizard walk you through it step by step.
How we handle garage door safety inspection
- Inspect springs, cables, drums and brackets
- Test the auto-reverse and photo-eye sensors
- Check close force and travel limits
- Inspect the manual release and its labels
- Give you a written report of anything unsafe
Typical garage door safety inspection prices
What moves the price:
- Door size and weight (single or double, steel or wood)
- Which parts need replacing and whether they are in stock
- Spring type and cycle rating
- Emergency or after-hours timing
These are typical U.S. ranges, not a quote. You get an exact price for your door before any work starts. For a quick estimate, try the repair cost calculator.
Garage Door Safety Inspection in Virginia
With large seasonal temperature swings in Virginia, track brackets and hinge screws work loose over time, and a loose track is the most common reason a door rubs, binds or comes off its rollers.
Close to the coast, salt air speeds up corrosion. Galvanized or coated springs, nylon rollers and stainless hardware hold up better than bare steel.
We cover 247 cities and towns across Virginia. Find garage door safety inspection in your city:
- Virginia Beach
- Norfolk
- Chesapeake
- Richmond
- Arlington
- Newport News
- Alexandria
- East Hampton
- Hampton
- Roanoke
- Portsmouth Heights
- Portsmouth
Garage Door Safety Inspection: frequently asked questions
How much does garage door safety inspection cost in Virginia?
Garage Door Safety Inspection typically costs $75-$150 including parts and labor, and usually takes about 45 minutes. The exact price depends on your door and the parts it needs, and you get it before any work starts. Call (833) 435-8883 for a quote.
Can you do garage door safety inspection the same day?
Often, yes. When a technician is available we can usually come the same day, and common parts are carried on the truck. Doors that won't close or have a broken spring are treated as priority calls, and emergency service is available.
Is garage door safety inspection covered by a warranty?
Our work comes with a 90-day labor warranty on repairs. New parts and doors also carry the manufacturer's warranty. Ask for the warranty details in writing with your quote.
Are your technicians licensed and insured?
Our technicians are insured, and where Virginia or your city requires a contractor license for garage door work, the job is done under that license. You're welcome to ask for proof when you book.
Should I repair or replace my garage door?
A good rule of thumb: if the repair costs more than about 50% of a replacement, or the garage door is near the end of its life, replace it. A garage door typically lasts 15 to 30 years. If several panels are damaged, the door is rusted through or rotted, or parts are discontinued, replacing it is often better value. Springs are the exception: a broken spring is always replaced, never repaired. Our free repair vs. replace calculator can help you compare.